New John Deere 6175M Tractor

Specifications

Engine description	John Deere PowerTech™ PVS
Engine displacement	6.8 L 415 cu in.
Rated engine power	129 kW 175 hp
Maximum engine power	143 kW 194 hp
Rated PTO power (hp SAE)	104 kW 141 hp
Maximum PTO power	At 1000 PTO rpm: 116 kW 157 hp
Transmission type	Standard: John Deere 20-speed PowrQuad™ Plus 40 km/h Optional: John Deere 16-speed PowrQuad Plus 30 km/h John Deere 20-speed AutoQuad™ Plus 40 km/h John Deere 20-speed CommandQuad™ Plus 40 km/h
Hydraulic pump rated output	Standard: 45-cc pump: 114 L/min 30 gpm Optional: 60 cc pump: 155 L/min 41 gpm
Rear hitch category (SAE designation)	3N/3
Base machine weight	7500 kg 16,534 lb

Description	John Deere PowerTech™ PVS
Engine type	6068HL558
Engine family	JDXL06.8324
Rated speed	2100 rpm
Aspiration	Variable geometry turbocharger
Cylinders liners
Emission level	Stage V
After treatment type	Lifetime diesel particle filter (DPF), diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) using diesel exhuast fluid (DEF)
Displacement	6.8 L 415 cu in.

Rated power	129 kW 175 hp
Rated PTO power (hp SAE)	104 kW 141 hp
Maximum PTO power	At 1000 PTO rpm: 116 kW 157 hp
Intelligent Power Management (available in transport and/or mobile PTO applications)
Power boost	10 percent
Maximum engine power	143 kW 194 hp
Engine peak torque	At 1600 U/min: 820 Nm 604.8 lb-ft
PTO torque rise	40 percent

Type	Standard: John Deere 20-speed PowrQuad Plus 40 km/h Optional: John Deere 16-speed PowrQuad Plus 30 km/h John Deere 20-speed AutoQuad Plus 40 km/h John Deere 20-speed CommandQuad Plus 40 km/h
Reverser	Electronic left-hand reverser
Clutch; wet/dry
Creeper	Not available

Type	Standard/optional: Pressure-and-flow compensated (PFC) system with Load Sensing function
Pump rated output	Standard: 45-cc pump: 114 L/min 30 gpm Optional: 60 cc pump: 155 L/min 41 gpm
Available flow at a single rear SCV
Available flow at front SCVs
Number of rear selective control valves (SCVs)	Standard: Two ISO couplers Optional: Two to four ISO couplers
Number of mid selective control valves (SCVs)	Up to three
Number of front selective control valves (SCVs)
Joystick SCV control	Mechanical/electrical
SCV control

Hitch draft control load sense type
Remote control valves available	Standard
Hitch category (SAE designation)	3N/3
Maximum lift capacity behind lift points	Standard: 8050 kg 17,747.2 lb Optional: 9050 kg 19,951.8 lb
Lift capacity at standard frame
Sensing type	Electronic lower link
Rear axle differential lock	Electrohydraulically with oil-cooled clutch

Drawbar category	Category 2
Maximum vertical load	Road/field use (250-mm extended): 3000 kg 6613.9 lb Field use (350-mm extended): 1800 kg 3968.3 lb Field use (400-mm extended): 1600 kg 3527.4 lb

Type	Electrohydraulically operated, oil-cooled, multi-disc design Standard: 38 mm (1.496 in.) 540, 1000 reversible shaft
Engine rpm (at rated PTO speeds)	540: 1960 rpm 1000: 1960 rpm
Multispeed PTO option availability
Ground speed PTO option availability
PTO actuation	In-cab switch and external fender-mounted remote control

Category	3N
Electric power	Seven-pin electrical socket
Standard lift capacity	4400 kg 9700.3 lb
Front power take-off (PTO)	Electrohydraulically engaged with oil-cooled, multi-disc design
PTO speed	1000 PTO: 1969 rpm

Type	Standard: Rack-and-pinion rear axle - 92-mm (3.6-in.) shaft (2.550-m/8.36-ft length)
Final drive type	Three planetary gear reduction
Differential controls
Axle type
Brakes, type and control	Primary brake (footbrake): Oil-cooled self-equalizing, self-adjusting, hydraulically actuated Secondary brake: Hydraulically actuated, integrated into primary brake (lever on left-hand side of operator seat) Park lock: Mechanical transmission park lock Mechanical front-wheel drive (MFWD) braking: Automatic MFWD engagement (MFWD engaged for braking at speeds less than 5 km/h [3.1 mph]) Front axle brakes (optional): TLS™ with front axle brakes (oil cooled, self-equalizing, self-adjusting, hydraulically actuated)
Rear differential lock	Electrohydraulically with oil-cooled clutch
Load rating

Type	Standard: MFWD Optional: Triple-Link Suspension (TLS) MFWD sxle (hydro-pneumatic, permanently active, triple link, self-leveling suspension with 100-mm [3.9-in.] suspension range) Triple-Link Suspension MFWD with brakes
Front axle differential lock	Self-locking differential
Load rating

Front	600/65R28 (152)
Rear	710/70R38 (200)
Wheel tread range
Turning radius with brakes
Turning radius without brakes

Tread spacing
Drive type
Track width
Midrollers

Type	Dynamic load sensing, hydrostatic, flow metering

Alternator size	Standard: 14 V/120 amp Optional: 14 V/150 amp 14 V/200 amp
Battery options	Standard: 12 V/154 amp-hr Optional: 12 V/174 amp-hr
Working lights
Type of bulb in headlight (Halogen, Zenon, LED)
Type of bulb in beacon (Halogen, Zenon, LED)
dB(A) rating for backup alarm
Total cold cranking amps

Rollover protective structure, OOS	Gearshift location - console/floor Console
Seat	Standard: Economy seat with mechanical suspension Optional: Standard seat with air suspension
Cab suspension	Optional: Mechanical Cab Suspension (MCS)
Instructional seat	Optional
Display	Cornerpost dispay (right-hand A-post) Functionalty: Performance monitor and individual settings
Radio	Optional integrated
Inner cab volume	2.73 m3 96.41 cu ft
dB(A) rating	70 dBA
Cab glass area	Without roof hatch or panoramic roof: 4.85 m2 52.2 sq ft
Safety glass rating
Front visibility

Wheelbase	2800 mm 110.2 in.
Overall width	2550 mm 100.39 in.
Overall length	4990 mm 196.5 in.
Overall height	3185 mm 125.39 in.
Drawbar clearance
Front axle center	Ground clearance: 545 mm 21.5 in.
Approximate shipping weight, Open;Cab	Cab: 7500 kg 16,534 lb

Base machine weight	Front axle 3000 kg 6613 lb Rear axle 4500 kg 9921 lb 7500 kg 16,534 lb
Maximum ballast level
Maximum permissible weight	12,300 kg 27,116 lb

Crankcase oil volume	23.5 L 6.2 U.S. gal.
Fuel tank	325 L 85.9 U.S. gal.
Diesel exhaust fluid (DEF) tank	20 L 5.3 U.S. gal.
Cooling system	28 L 7.4 U.S. gal.
Transmission-hydraulic system	PowrQuad Plus / AutoQuad Plus: 76 L 20.1 U.S. gal.

Interval for engine oil change	750 hours
Interval for hydraulic/transmission oil change	1500 hours
Interval for engine coolant change	6000 hours

Loader	680R
Lift capacity at full height	Mechanical self-leveling (MSL): 2453 kg 5407.93 lb
Maximum lift height	MSL: 4.48 m 176.37 in.

Guidance	Optional: AutoTrac™ on cornerpost display (straight track only), AutoTrac with 4240/4640 Universal Display
Telematic	Optional: JDLink™
Remote diagnostics	Optional: JDLink

Side slope rating
Uphill/downhill slope rating
Country of manufacture	Germany

Date collected	19-Mar-20